Auto

How Can You Fix Your Car AC- DIY?

An air conditioner that is unable to blow cold air is a serious problem. With the summer heat in Las Vegas, you don’t want to go anywhere without turning on the car’s air conditioner. Most summer days can reach up to 32 degrees as well as having a faulty air conditioner.

You may notice weird noises in the car, it might take a while for you to realize that it only happens when the A/C is turned on. Fixing your air conditioning from an auto AC repair may just take a simple tweak, but unless you know what you are looking at it can be quite complex.

However, if you have no idea of what things are, the best move would be to take your car to a qualified auto electrician. Keep reading if you are feeling confident you could carry out it as a DIY repair.

Refilling refrigerant step-by-step

The very first step is to get all the essential equipment as well as understand the safety measures you know. Understand that failure to heed to the safety measures results in injuries.

Things you should have:

  • Gloves and goggles
  • A can or two of refrigerant
  • A single pressure hose as well as manifold charge with three hoses

Other things to consider

  • Wear goggles to protect the eyes.
  • Wear gloves and long sleeves for preventing accidental spraying on the body parts.
  • Analyze which part of the car needs to touch and should not touch.

Things you should not touch

  • There is no need to touch anything with whom you are unfamiliar.
  • Try as much as possible not to touch the engine bay that comprises the hoses.

Things you will need to touch

  • Fill port that is located on the left-hand side of the engine bay.

Turn off the engine

Ensure that it’s off for a couple of hours before you are going to look for the hoses of the fill port.

Connect the hose

You have to twist the can as you put the hose on it. There is no need to lock the pin just yet. Find the low-end port of the A/C. Keep in consideration, it should have an L letter printed on the cap. After that, remove the cap and connect the other end of the hose to the low port. If you still feel any kind of difficulty, it would be best to hire car ac repair las vegas.

Let out air

Loosen the end of the can in order to let any air out. Keep in mind that, the larger the noise, the more refrigerant is left inside. Unleash it for one or two seconds, and then tighten it back. Now it’s time to turn the pin on the can clockwise. Let it pierce through the can.

Turn on the car

Turn on the engine after you have done the steps above. After that, turn on the A/C and turn it to its setting. Turn it to its coldest setting.

Remove the hose

Once it’s all out, you have to turn off the engine and lock the pin on the hose. You must turn it full by ensuring that it’s locked. Remove the hose from the A/C system.

Now, what if there is a leakage? The best thing about refrigerants these days is, they also come with UV dye that allows you to see if there is any leakage around the hose. You can also use UV light to find it.

Sometimes, the refrigerant is not the problem it might just be the fan. You can also try replacing it yourself, it requires you to open up the dashboard, the filters as well as much more. For this purpose, the best better way to do this is to call auto repair Las Vegas in order to get the fastest and the most reliable car service to the people of Las Vegas.

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button